For prefabricated elevator door covers, in addition to proper selection and installation, corresponding maintenance measures should also be taken, which has a significant impact on the use of the door cover line, especially its service life.

在維護的過程中，應該主要保持裝配式電梯門套的干燥，遇到陰雨天氣，一定要采取方法保護，以免門套線因發霉而影響工程質量。但也不能過度的干燥，所以在使用中應盡量避免陽光的暴曬，盡量放在室內進行存放，以免長時間受陽光暴曬，因為長期在陽光下直接暴曬的話門套線會(huì )出現老化、開裂等現象。

During maintenance, it is important to maintain the dryness of the assembled elevator door cover. When encountering rainy weather, measures must be taken to protect the door cover line from mold, which may affect the quality of the project. But it should not be excessively dry, so during use, it is advisable to avoid direct sunlight exposure and store it indoors as much as possible to avoid prolonged exposure to sunlight, as prolonged exposure to direct sunlight can lead to aging, cracking, and other phenomena on the door cover line.

如果裝配式電梯門套上有油污，可用抹布蘸溫水沾少量洗衣粉擦洗，若是顏料，必須在污跡末滲如木質表層以前加以；盡量避免與水長時間接觸，特別是不能與熱水接觸，若有則要及時擦干。

If there is oil stains on the assembled elevator door cover, it can be wiped with a cloth dipped in warm water and a small amount of laundry detergent. If there is paint, it must be removed before the stains seep into the wooden surface; Try to avoid prolonged contact with water, especially hot water. If there is contact, it should be wiped dry in a timely manner.

安裝流程

Installation process

基層墻面處理→墻面鉆孔踢槽→放鍍鋅鉛絲或銅絲→鋼絲網連接→拼裝→打線→大理石板材安裝固定→灌漿→清縫→整體清潔→綜合檢查→驗收

Grassroots wall treatment → Wall drilling and grooving → Placing galvanized lead or copper wire → Steel wire mesh connection → Assembly → Wiring → Installation and fixation of marble panels → Grouting → Joint cleaning → Overall cleaning → Comprehensive inspection → Acceptance